NUMBERS TO CALL & REPEAT TIMES

This system allows you to make TESTCALLS to the same number or different numbers one or many times. Call a single telephone number many times to test a hunt group or call a list of new direct dial numbers.

Permissive format allowed

You can "cut & paste" most formats of telephone numbers into the "Numbers to call" box as long as 10 or 11 digits are on a line. This permissive format features helps you cut and paste from applications. Any of these formats can be copied to the box with no issues..

8042666688
804-266-6688
804.266.6688
804 266 6688
(804) 266-6688
(804)266-6688
804 266-6688
or..
1+ any of the above permutations.

Force Carrier Prefix

By default, the system uses the "Optimized Routing" path out of our Richmond, Virginia data center. Our area code is 804. Thus, 804, and toll free 800 (8xx) numbers use classic TDM trunks at 64k g711. All other calls use our VOIP carrier at 8k g729 coding.

You may wish to force a call over one of the above such as using a g711 TDM path for destination audio quality testing. To do so...

• use 0 + 10 digits to force use of TDM trunks
• use 2 + 10 digits to force use of VOIP trunks<

Repeat x Times

This box simply repeats the sequence of the "Number(s) to call" box. Thus, here are 4 ways to TESTCALL 804-266-6600 10 times.

• Put 804-266-6600 in the box 10 times and repeat = 1.
• Put 804-266-6600 in the box 5 times and repeat = 2.
• Put 804-266-6600 in the box 2 times and repeat = 5.
• Put 804-266-6600 in the box 1 times and repeat = 10.

Pause feature

Put a "P" or "p" on a line by itself and you will pause calling for one second. A pause counts as a call. This is useful when you first load a system with calls and then follow with another call a few seconds latter to see effect.